top of page

Journal Papers in English丨英文期刊论文

  1. Chen, P., Wang, B., Ma, K. (2025). Optimal design and numerical studies of negative stiffness device–TMD controlled systems using PSO algorithm. Soil Dynamics and Earthquake Engineering, 189, 109111. (link)

  2. Yu, T., Wang, B., Chen, P., Xie, Y., Zhang, Z. (2025). Adaptive seismic isolation system combining gap dampers for pounding mitigation in base-isolated structures. Engineering Structures, 322, 119079. (link)

  3. Wang, B., Zhu, S., Chen, K., Qiu, CX., Chen, P. (2024). Damage-free self-centering steel columns incorporating SMA bolts and replaceable steel angles. Engineering Structures, 321, 119000. (link)

  4. Wang, B., Chen, P., Jiang, H., Wang, J. (2024). Performance of steel-plate-reinforced concrete composite walls in tall structures, Proceedings of the Institution of Civil Engineers-Civil Engineering, 117(3): 118-125 (link)

  5. Wang, B., Karavasilis, T. L., Chen, P. (2024). Steel truss reinforced concrete composite walls: Numerical investigation and design consideration. Soil Dynamics and Earthquake Engineering, 184, 108865. (link)

  6. Lu, Y., Dai, K., Chen, P., Wang, B., Huang, C. (2024). Experimental investigation on lead rubber bearings under large strain with its accurate simulation using gated recurrent unit based method. Soil Dynamics and Earthquake Engineering, 184, 108863. (link)

  7. Chen, P., Wang, B., Dai, K., Ma, K. (2024). Comprehensive design strategy of the NSD–TMD controlled system with closed-form frequency-amplitude solutions. Engineering Structures, 315, 118447. (link)

  8. Huang, J., Zhu, S., Wang, B., Chen, ZP. (2024). Shake table tests of steel moment resisting frame with self-centering SMA-based isolators. Earthquake Engineering and Structural Dynamics, 53(11): 3489-3513. (link)

  9. Wu, M., Wang, B., Ba, Z., Dai, K., Liang, J. (2024). Propagation attenuation of elastic waves in multi-row infinitely periodic pile barriers: A closed-form analytical solution. Engineering Structures, 315, 118480. (link)

  10. Huang, J., Wang, B., Chen, ZP., Zhu, S. (2024). Development of novel self-centering timber beam–column connections with SMA bars. Journal of Structural Engineering, 150(8), 04024078. (link)

  11. Wang, B., Karavasilis, T. L., Chen, P., Dai, K. (2024). Seismic modeling and performance evaluation of seismically isolated building considering large strain effects under near-fault earthquakes. Journal of Building Engineering, 90, 109339. (link)

  12. Chen, ZP., Hu, S., Zhu, S., Wang, B. (2024). Development of novel two-level SMA-based self-centring steel columns for seismic resilience. Journal of Constructional Steel Research, 217, 108629. (link)

  13. Zhang, C., Yu, T., Wang, B., Huang, W., Zhong, G., Zhao, F. (2024). Experimental and numerical investigations of steel U-shaped dampers under vertical loadings for seismic mitigation. Soil Dynamics and Earthquake Engineering, 179, 108571. (link)

  14. Wang, B., Nishiyama, M, Zhu, S (2024). Development of a novel anchorage system for shape memory alloy bars in self-centering structures. Journal of Structural Engineering, 150(5), 04024035. (link)

  15. Huang, J., Zhu, S., Wang, B. (2024). Self-centering steel beam-to-column connections with novel superelastic SMA angles. Journal of Constructional Steel Research, 214, 108458. (link)

  16. Wu, M., Wang, B., Ba, Z., Dai, K., Liang, J. (2024). Vibration isolation of infinitely periodic pile barriers for anti-plane shear waves: An exact series solution. Soil Dynamics and Earthquake Engineering, 176, 108347. (link)

  17. Wang, J., Zheng, Y., Ma, Y., Wang, B. (2024). Experimental study on asymmetric and bistable nonlinear energy sinks enabled by side tracks. Mechanical Systems and Signal Processing, 206, 110874. (link)

  18. Chen, P., Wang, B., Karavasilis, T. L., Dai, K. (2023). A compatible uniaxial Bouc–Wen model for accurate estimation of residual deformation of seismically isolated structures. Engineering Structures, 297, 117021. (link)

  19. Chen, P., Wang, B., Zhou, D., Wu, X., Dai, K. (2023). Performance evaluation of a nonlinear energy sink with quasi-zero stiffness property for vertical vibration control. Engineering Structures, 282, 115801. (link)

  20. Wang, B., Chen, P., Zhu, S., Dai, K. (2023). Seismic performance of buildings with novel self-centering base isolation system for earthquake resilience. Earthquake Engineering & Structural Dynamics, 52(5): 1360-1380. (link)

  21. Chen, P., Wang, B., Zhang, Z., Li, T., Dai, K. (2023). A generalized model of lead rubber bearing considering large strain stiffening and degradation. Engineering Structures, 275, 115264. (link)

  22. Dai, K., Yang, Y., Li, T., Ge, Q., Wang, J., Wang, B., Chen, P., Huang, Z. (2022). Seismic analysis of a base-isolated reinforced concrete frame using high damping rubber bearings considering hardening characteristics and bidirectional coupling effect. Structures, 46, 698-712. (link)

  23. Ghafoori, E., Wang, B., Andrawes, B. (2022). Shape memory alloys for structural engineering: An editorial overview of research and future potentials. Engineering Structures, 273, 115138. (link)

  24. Li, T., Yang, Y., Xu, J., Dai, K., Ge, Q., Wang, J., Chen, P., Wang, B., Huang, Z. (2022). Hysteretic behavior of high damping rubber bearings under multiaxial excitation. Soil Dynamics and Earthquake Engineering, 163, 107549. (link)

  25. Chen, P., Wang, B., Dai, K., Li, T. (2022). Analytical and numerical investigations of base isolation system with negative stiffness devices. Engineering Structures, 268, 114799. (link)

  26. Chen, ZP., Wang, B. Zhu, S, Wu, G. (2022). Two-level performance-based seismic design approach for steel frames with novel self-centring seismic base isolators. Journal of Constructional Steel Research, 195, 107352. (link)

  27. Chen, ZP., Zhu, S., Yu, H., Wang, B. (2022). Development of novel SMA-based D-type self-centering eccentrically braced frames. Engineering Structures, 260, 114228. (link) (Runner Up for the Best Paper of the Year 2022 in Engineering Structures)

  28. Wang, B., Zhu, S. (2022). Cyclic behavior of iron-based shape memory alloy bars for high-performance seismic devices. Engineering Structures, 252, 113588. (link)

  29. Wang, B., Zhu, S., Casciati, F., Chen, K., Jiang, H. (2021). Cyclic behavior and deformation mechanism of superelastic SMA U-shaped dampers under in-plane and out-of-plane loadings. Smart Materials and Structures, 30, 055009. (link)

  30. Gu, Q., Zhang, N., Wang, B., Zhu, S. (2021) Accurate response sensitivity analysis of a thermomechanical constitutive model for superelastic SMAs. Journal of Engineering Mechanics, 147(5), 04021026. (link)

  31. Wang, B., Nishiyama, M., Zhu, S., Tani, M., Jiang, H. (2021). Development of novel self-centering steel coupling beams without beam elongation for earthquake resilience. Engineering Structures, 232, 111827. (link)

  32. Wang, J., Wang, B., Zhang, C., Liu, Z. (2021). Effectiveness and robustness of an asymmetric nonlinear energy sink-inerter for dynamic response mitigation. Earthquake Engineering & Structural Dynamics, 50(6), 1628-1650. (link)

  33. Wang, B., Zhu, S., Chen, K., Huang, J. (2020). Development of superelastic SMA angles as seismic-resistant self-centering devices. Engineering Structures, 218, 110836. (link)

  34. Wang, B., Zhu, S., Casciati, F. (2020). Experimental study of novel self-centering seismic base isolators incorporating superelastic shape memory alloys. Journal of Structural Engineering, 146(7), 04020129. (link)

  35. Wang, J., Wang, B., Liu, Z., Li, H., Zhang, C. (2020). Seismic response mitigation of building structures with a novel vibro-impact dual-mass damper. Engineering Structures, 215, 110673. (link)

  36. Wang, J., Wang, B., Wierschem, N. E., Spencer Jr, B. F. (2020). Dynamic analysis of track nonlinear energy sinks subjected to simple and stochastic excitations. Earthquake Engineering & Structural Dynamics, 49(9), 863-883. (link)

  37. Wang, J., Wang, B., Liu, Z., Zhang, C., Li, H. (2020). Experimental and numerical studies of a novel asymmetric nonlinear mass damper for seismic response mitigation. Structural Control and Health Monitoring, 27(4), e2513. (link)

  38. Wang, J., Wierschem, N. E., Wang, B., Spencer Jr, B. F. (2020). Multi-objective design and performance investigation of a high‐rise building with track nonlinear energy sinks. The Structural Design of Tall and Special Buildings, 29(2), e1692. (link)

  39. Wang, B., Zhu, S., Zhao, J., Jiang, H. (2019). Earthquake resilient RC walls using shape memory alloy bars and replaceable energy dissipating devices. Smart Materials and Structures, 28(6), 065021. (link)

  40. Wang, B., Jiang, H., Wang, J. (2019). Numerical simulation and behavior insights of steel columns with SMA bolts towards earthquake resilience. Journal of Constructional Steel Research, 161, 285-295. (link)

  41. Wang, J., Li, H., Wang, B., Liu, Z., Zhang, C. (2019). Development of a two-phased nonlinear mass damper for displacement mitigation in base-isolated structures. Soil Dynamics and Earthquake Engineering, 123, 435-448. (link)

  42. Yu, J., Ye, J., Zhao, B., Xu, S., Wang, B., Yu, K. (2019). Dynamic response of concrete frames including plain ductile cementitious composites. Journal of Structural Engineering, 145(6), 04019042. (link)

  43. Wang, B., Zhu, S., Qiu, C. X., Jin, H. (2019). High-performance self-centering steel columns with shape memory alloy bolts: Design procedure and experimental evaluation. Engineering Structures, 182, 446-458. (link)

  44. Wang, B., Liang, J., Lu, Z. (2019). Experimental investigation on seismic behavior of square CFT columns with different shear stud layout. Journal of Constructional Steel Research, 153, 130-138. (link)

  45. Wang, B., Zhu, S. (2018). Cyclic tension–compression behavior of superelastic shape memory alloy bars with buckling-restrained devices. Construction and Building Materials, 186, 103-113. (link)

  46. Wang, B., Zhu, S. (2018). Superelastic SMA U-shaped dampers with self-centering functions. Smart materials and structures, 27(5), 055003. (link)

  47. Wang, B., Zhu, S. (2018). Seismic behavior of self-centering reinforced concrete wall enabled by superelastic shape memory alloy bars. Bulletin of Earthquake Engineering, 16(1), 479-502. (link)

  48. Wang, B., Zhu, S., Xu, Y. L., Jiang, H. (2018). Seismic retrofitting of non-seismically designed RC beam-column joints using buckling-restrained haunches: Design and analysis. Journal of Earthquake Engineering, 22(7), 1188-1208. (link)

  49. Wang, B., Jiang, H., Lu, X. (2017). Seismic performance of steel plate reinforced concrete shear wall and its application in China Mainland. Journal of Constructional Steel Research, 131, 132-143. (link)

  50. Wang, B., Jiang, H., Lu, X. (2017). Experimental and numerical investigations on seismic behavior of steel truss reinforced concrete core walls. Engineering Structures, 140, 164-176. (link)

  51. Wang, B., Jiang, H. (2017). Experimental study on seismic performance of steel plate reinforced concrete tubes under cyclic loading. The Structural Design of Tall and Special Buildings, 26(16), e1345. (link)

  52. Jiang, H., Wang, B., Lu, X. (2013). Experimental study on damage behavior of reinforced concrete shear walls subjected to cyclic loads. Journal of earthquake engineering, 17(7), 958-971. (link)

  53. Lu, X., Wang, B., Jiang, H., Li, J., Lu, W. (2013). Shaking table tests on a complex high-rise structure with two towers and lapping transfer columns. Journal of Earthquake and Tsunami, 7(04), 1250030. (link)

Journal Papers in Chinese丨中文期刊论文

  1. Wang, B., Yang, Y., Chen. P., Zhang, Z., Dai, K., Liu, J. (2024). Hysteretic behavior and seismic isolation analyses of lead rubber bearings under large cyclic strain loading. Advanced Engineering Sciences.
    王斌，杨怡昭，陈鹏，张展宏，戴靠山，刘兢兢. 大变形加载下铅芯橡胶隔震支座滞回特性与隔震性能分析, 工程科学与技术, 2024

  2. Wu, M., Wang, B., Ba, Z., Dai, K., Liang, J. (2024). Seismic response analysis of near-fault subway stations under scenario earthquakes. Advanced Engineering Sciences
    吴孟桃，王斌，巴振宁，戴靠山，梁建文. 设定地震的近断层地铁车站结构宽频地震响应分析, 工程科学与技术, 2024

  3. Wu, M., Wang, B., Ba, Z., Dai, K., Liang, J. (2024). Source-basin-structure seismic simulation based on integrated physical model: FK-SE-FE approach. Journal of Vibration Engineering
    吴孟桃，王斌，巴振宁，戴靠山，梁建文. 震源⁃盆地⁃结构整体物理模型地震模拟: FK⁃SE⁃FE 方法, 振动工程学报, 2024

  4. Wang, B., Zhang, Z., Chen. P., Zhu, S., Dai, K. (2023). Self-centering capability of seismically isolated structures after earthquakes. Advanced Engineering Sciences, 55(5): 5-13.
    王斌，张展宏，陈鹏，朱松晔，戴靠山. 隔震结构震后复位能力研究, 工程科学与技术, 55(5), 2023: 5-13.

  5. Yang, Y., Dai, K., Yang, K., Li, T., Wang, J., Wang, B. (2023). Discussion on design requirements to maintain normal functionality for energy dissipation frame structure using viscous dampers. Earthquake Engineering and Engineering Dynamics, 43(6): 93-101.
    杨毅坚，戴靠山，杨凯，李弢，王健泽，王斌. 黏滞阻尼器减震框架结构保持正常使用功能的设计要求探讨, 地震工程与工程振动, 43(6), 2023: 93-101

  6. Lai, B., Wen. A., Shu, G., Wang, B. (2023). Structural performance and design method of ultra-high strength steel reinforced concrete composite columns. Journal of Building Structures, 44(8): 139-148.
    赖柄霖, 温安平, 舒赣平, 王斌. 超高强型钢混凝土组合柱受力性能及设计方法, 建筑结构学报. 44(8), 2023: 139-148.

  7. ​Jiang, H., Wang, B., Lu, X. (2015). Elasto plastic analysis of reinforced concrete shear walls based on cyclic soften membrane model. Journal of Tongji University, 43(5), 676-684. 
    蒋欢军, 王斌, 吕西林. 基于循环软化膜理论的钢筋混凝土剪力墙弹塑性分析, 同济大学学报(自然科学版), 43(5), 2015: 676-684.

  8. Jiang, H., Wang, B., Lu, X., Gu, Q. (2014). Seismic performance of RC composite shear walls with different steel embedded layout. Earthquake Engineering and Engineering Dynamics, 34, 478-485.
    蒋欢军, 王斌, 吕西林, 古泉. 不同配钢形式RC组合剪力墙抗震性能分析, 地震工程与工程振动, 34(S1), 2014: 478-485.

  9. Jiang, H., Wang, B.*, Lu, X. (2014). Concepts and measures for improving seismic performance of reinforced concrete shear wall. Journal of Tongji University, 42(2), 1-8. (Top Articles in Outstanding Science and Technology Journals of China)
    蒋欢军, 王斌, 吕西林. 提高钢筋混凝土剪力墙抗震性能的思想与方法, 同济大学学报(自然科学版), 42(2), 2014: 1-8. (此论文入选领跑者5000-中国精品科技期刊顶尖学术论文)

  10. Wang, B., Jiang, H., Lu, X. (2014). Numerical simulation of steel plate-reinforced concrete composite shear wall. Journal of Disaster Prevention and Mitigation Engineering, 2014,34(6),705-711.
    王斌, 蒋欢军, 吕西林. 内置钢板钢筋混凝土组合剪力墙数值模拟, 防灾减灾工程学报, 34(6), 2014: 705-711.

  11. Jiang, H., Wang, B., Lu, X.. (2013). Seismic damage analysis and design suggestions for staircases in RC frame structures. Journal of Vibration and Shock, 32(3), 22-28. (Top Articles in Outstanding Science and Technology Journals of China)
    蒋欢军, 王斌, 吕西林. 钢筋混凝土框架结构楼梯震害分析与设计建议, 振动与冲击, 32(3), 2013: 22-28. (此论文入选领跑者5000-中国精品科技期刊顶尖学术论文)

  12. Jiang, H., Wang, B., Lu, X., Chen Y. (2011). Seismic analysis and shaking table test of China Pavilion for EXPO 2010 Shanghai. Journal of civil, architectural and environmental, 33(3), 13-18.
    蒋欢军, 王斌, 吕西林, 陈云. 上海世博会中国馆抗震分析与振动台模型试验研究, 土木建筑与环境工程, 33(3), 2011: 13-18.

  13. Jiang, H., Wang, B., Lu, X. (2010). Performance limit States and deformation limits of RC beams and columns. Building Structure, 40(1), 10-14.
    蒋欢军, 王斌, 吕西林. 钢筋混凝土梁和柱性能界限状态及其变形限值, 建筑结构, 40(1), 2010: 10-14.

Papers in International Conferences丨国际会议论文

  1. Xie, Y., Wang, B., Karavasilis, T. (2024). Development of a novel multi-stage yielding energy dissipation brace for seismic mitigation. The 18th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-18), November 13–15, 2024, Chiang Mai, Thailand.

  2. Wang, B., Zhu, S. (2024). Self-centering structural members enabled by superelastic SMA devices. The 18th World Conference on Earthquake Engineering (18WCEE), June 30-July 5, Milan, Italy.

  3. Wang, B., Zhu, S., Casciati, F. (2020). Development of novel self-centering seismic base isolators incorporating SMAs for earthquake resilience. 15th Annual Meeting of Japan Association for Earthquake Engineering (JAEE), Paper No. C-5-3_T2020-011, Dec. 2-3, Japan.

  4. Wang, B., Nishiyama, M., Tani, M., Wang, S., Liu, Y., Nagaya, S. (2020). Development of a novel self-centering steel coupling beam with SMA bolts and energy dissipation devices, 17th World Conference on Earthquake Engineering (17WCEE), Paper No. C002231, Sep. 13-18, Sendai, Japan.

  5. Wang, B., Nishiyama, M., Tani, M. (2020). Development of a novel self-centering coupling beam for RC coupled wall system. FIB Symposium 2020, Nov. 22-24, Shanghai, China.

  6. Wang, B., Zhu, S. (2019). Seismic upgrade of self-centering RC walls using shape memory alloy bars and replaceable energy dissipating devices. The16th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC16), Dec. 3-6, Brisbane, Australia.

  7. Wang, B., Zhu, S. (2018). Experimental investigation of self-centering steel columns with SMA bolts. Ninth International Conference on Advances in Steel Structures (ICASS’2018), Dec. 5-7, Hong Kong, China.

  8. Zhu, S., Wang, B. (2018). Towards earthquake resilience: Using superelastic SMA for high-performance seismic-resistant structures. 2nd International Workshop on Resilience, Oct. 31-Nov. 2, Nanjing and Shanghai, China.

  9. Wang, B., Qiu, C.X., Jin, H., Zhu, S. (2017). Cyclic behavior of self-centering steel columns with SMA bolts. The 15th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC15), Oct. 11-13, Xi’an, China.

  10. Jiang, H., Wang, B., Lu, X. (2015). Experimental study on damage behavior of steel plate-reinforced concrete tubes. 6th International Conference on Advances in Experimental Structural Engineering, 11th International Workshop on Advanced Smart Materials and Smart Structures Technology, Aug. 1-2, Urbana-Champaign, United States.

  11. Wang, B., Jiang, H., Lu, X. (2012). Experimental study on damage behavior of reinforced concrete shear wall with modern detailing. The Twenty-fifth KKCNN Symposium on Civil Engineering, pp. 472-475, Oct. 22-24, Busan, Korea.

  12. Wang, B., Jiang, H., Lu, X. (2012). Seismic performance of steel plate-reinforced concrete composite shear wall. 15th World Conference on Earthquake Engineering (15WCEE), Paper No. 1232, Sep. 24-28, Lisboa, Portugal.

  13. Wang, B., Jiang, H., Lu, X. (2011). Study on the seismic performance of a complex high-rise structure with two towers and lapping transfer columns by shaking table tests. The 4th International Conference on Advances in Experimental Structural Engineering, Jun. 29-30, Ispra, Italy.

  14. Wang, B., Jiang, H., Lu, X. (2011). Seismic analysis of RC structure under multiple earthquakes. The 8th International Conference on Urban Earthquake Engineering, Paper No. 11-086, Mar. 7-8, Tokyo, Japan.

  15. Jiang, H., Wang, B., Lu, X., Yang, J. (2010). Shaking table tests and numerical analysis of structural model China Pavilion for EXPO 2010 Shanghai. The 11th International Symposium on Structural Engineering, pp. 194-200, Dec. 18-20, Guangzhou, China.

Papers in Chinese Conferences丨国内会议论文

  1. Wang, B., Zhang, C., Lu, X., (2013). Nonlinear time history analysis of a steel reinforced concrete frame-concrete tube structure. The 10th Sino-Japanese Structural Engineering Conference, pp. 235-243, Nov. 30-Dec. 1, Nanjing, China.
    王斌, 张翠强, 吕西林. 型钢框架-混凝土核心筒和钢框架-支撑核心筒结构弹塑性时程分析, 第十届中日建筑结构技术交流会, pp. 235-243, 2013年11月30日-12月1日, 南京。

  2. Wang, B., Jiang, H. (2009). Considering modeling stairs on the seismic performance of overall structures. The Symposium of Earthquake Engineering and Mitigate Earthquake in commemoration of the first anniversary of the Wenchuan earthquake, pp. 322-327, May 12-14, Chengdu, China.
    王斌, 蒋欢军. 考虑楼梯整体建模对结构抗震性能的影响, 纪念汶川地震一周年地震工程与减轻地震灾害研讨会, pp. 322-327, 2009年5月12日-14日, 成都。

Technical Reports & Book Chapters丨研究报告与图书章节   

  1. Wang, B., Zhang, C., Lu, X. (2013). “Nonlinear time history analysis of a steel reinforced concrete frame-concrete tube structure and a steel frame-braced tube structure”. Research Institute of Structural Engineering and Disaster Reduction, Tongji University
    王斌, 张翠强, 吕西林. 钢框架-混凝土核心筒结构和钢框架支撑结构动力弹塑性分析, 结构工程与防灾研究所, 同济大学

  2. Wang, B., Li, J., Zhang, C. (2010). “Shaking table test of Project No. 147 building in Huangpu district, Shanghai”. State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University
    王斌, 李检保, 张翠强. 上海黄浦区174街坊项目模拟地震振动台试验研究报告, 土木工程防灾国家重点实验室, 同济大学

  3. Yue, J., Wang, B., Qian, J. (2008). “Seismic analysis of China National Pavilion for EXPO 2010 Shanghai”. State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University
    岳建广, 王斌, 钱江. 中国2010年上海世博会中国馆国家馆结构抗震性能计算分析报告, 土木工程防灾国家重点实验室, 同济大学

  4. Jiang, H., Wang, B. (2011) Seismic damage analysis of reinforced concrete frame structures considering the effect of staircases, in book “Study on seismic damage of Wenchuan earthquake”, Editor: State Key Laboratory of Disaster Reduction in Civil Engineering. Shanghai, Tongji University Press
    蒋欢军, 王斌. 现浇楼梯对钢筋混凝土框架结构抗震性能影响分析, “汶川地震震害研究”第9章, 编者: 土木工程防灾国家重点实验室, 同济大学出版社, 2011年

Patents丨专利 

  1. Wang, B., Chen, P., Dai, K., Zhang, Z., Yang, Y. “Low-damage self-centering steel column”, China Invention Patent, Number: ZL 2022 1 0072154.6, Grant Date: Sep. 24, 2024.
    王斌，陈鹏，戴靠山，张展宏，杨怡昭. “一种震后无损伤自复位钢框架柱”, 中国发明专利 ZL 2022 1 0072154.6, 授权日期: 2024年9月24日

  2. Wang, B., Tang, Y., Chen, P., Wu, M. “High-performance self-centering energy dissipation brace”, China Patent for Utility Model, Number: ZL 2023 2 1888654.3, Grant Date: Mar. 1, 2024.
    王斌，唐懿，陈鹏，吴孟桃. “一种高性能自复位耗能支撑”, 中国实用新型专利 ZL 2023 2 1888654.3, 授权日期: 2024年3月1日

  3. Wang, B., Xie, Y., Chen, P., Wu, M., Dai, K. “Multi-stage yield energy dissipation brace”, China Patent for Utility Model, Number: ZL 2023 2 2344938.2, Grant Date: Dec. 29, 2023.
    王斌，谢雨，陈鹏，吴孟桃，戴靠山. “一种多阶屈服耗能支撑”, 中国实用新型专利 ZL 2023 2 2344938.2, 授权日期: 2023年12月29日

  4. Wang, B., Zhang, Z., Chen, P., Dai, K. “Multi-function self-centering base isolation bearing”, China Invention Patent No. ZL 2022 1 0072148.0, Grant Date: Sep. 20, 2022.
    王斌，张展宏，陈鹏，戴靠山. “一种多功能型自复位隔震支座”, 中国发明专利 ZL 2022 1 0072148.0, 授权日期: 2022年9月20日

  5. Zhang, Z., Wang, B., Chen, P., Dai, K. "Pull-out resistant and self-centering seismic isolation bearing", China Patent for Utility Model, Number: ZL 2022 2 0167929.3, Grant Date: Jun. 3, 2022.
    张展宏，王斌，陈鹏，戴靠山. “一种抗拉拔自复位复合隔震支座”, 中国实用新型专利 ZL 2022 2 0167929.3, 授权日期: 2022年6月3日

  6. Chen, P., Wang, B., Dai, K. "Vertical tuning vibration damping device with quasi-zero stiffness characteristics", China Patent for Utility Model, Number: ZL 2022 2 0170118.9, Grant Date: Jan. 21, 2022.
    陈鹏，王斌，戴靠山.“一种带准零刚度特性的竖向调谐减震/振装置”, 中国实用新型专利 ZL 2022 2 0170118.9, 授权日期: 2022年1月21日

  7. Wang, B., Chen, P., Zhang, Z., Dai, K. “Filler-free bar-type energy dissipation device”, China Invention Patent No. ZL 2022 1 0073721.X, Grant Date: Aug. 19, 2022.
    王斌, 陈鹏，张展宏，戴靠山. “一种无灌浆棒材耗能装置”, 中国发明专利 ZL 2022 1 0073721.X, 授权日期: 2022年8月19日

  8. Wang, B., Zhu, S. “Self-centering energy dissipating brace”, China Invention Patent No. ZL 2018 1 0166828.2, Grant Date: Sep. 10, 2021.
    王斌, 朱松晔. “自复位耗能支撑装置”, 中国发明专利 ZL 2018 1 0166828.2, 授权日期: 2021年9月10日

  9. Wang, B., Zhu, S. “Self-centering coupling beam enabled by superelastic shape memory alloy”, China Invention Patent No. ZL 2016 1 1175145.0, Grant Date: Mar. 9, 2021.
    王斌, 朱松晔. “一种基于超弹性形状记忆合金的自复位连梁”, 中国发明专利 ZL 2016 1 1175145.0, 授权日期: 2021年3月9日

  10. Wang, B., Zhu, S. “Hybrid self-centering viscous dampers”, China Invention Patent No. ZL 2019 1 0562900.8, Grant Date: Nov. 27, 2020.
    王斌, 朱松晔. “自复位黏滞复合阻尼器”, 中国发明专利 ZL 2019 1 0562900.8, 授权日期: 2020年11月27日

  11. Wang, B., Jiang, H. “A novel self-centering steel plate shear wall with superelastic shape memory alloy”, China Invention Patent No. ZL 2016 1 0988435.0, Grant Date: Oct. 1, 2019.
    王斌, 蒋欢军. “一种基于超弹性形状记忆合金螺杆的自复位钢板剪力墙”, 中国发明专利 ZL 2016 1 0988435.0, 授权日期: 2019年10月1日​

​

Computer Software Copyrights丨软件著作权 

  1. Wu, M., Chen, P., Wang, B. “Intelligent simulation system for vibration performance of subway superstructure”, May. 14, 2024.
    吴孟桃，陈鹏，王斌. “地铁上盖结构振动性能精细化智慧仿真模拟系统”, 2024年5月14日

  2. Chen, P., Wang, B.. “Software of laminated rubber bearing under large strain loading”, Mar. 1, 2023.
    陈鹏，王斌. “叠层橡胶支座大变形仿真模拟软件”, 2023年3月1日​​

bottom of page